People who have spent enough time researching overunity technologies should know that payday happens when it is cold. Who is writing the check for all this energy? Well, it’s on the house if you are ready to give up a little heat which is a side effect of negative entropy. Other people who collected on this energy giveaway include Floyd Sweet with his VTA and John Searl who noticed cold components in his device.
Recently I noticed this youtube post that shows how to charge a capacitor to 200V with a 24V battery.
Note: This link was deleted from youtube. If you have it please let me know.
Nothing about this seems too interesting because it is commonly known that an inductor in a buck converter can step up voltage. The author named NRGFromTheVaccum then posted this:
Endothermic & Exothermic Electric Discharges
Note: This link was deleted and recovered (thanks Duncan!)
Seeing and hearing 2 completely different types of sparks made by the same gap seemed pretty damn cool. He left these comments. “These two reactions are called exothermic and endothermic. Exothermic means energy is radiated outward. Which usually generates heat or heating. Endothermic means energy is radiated inward which usually generates cold or cooling. …When I raise the voltage high enough, I can cause frost to form on each end of the spark gap.”
This made me want to examine his “free energy” circuit a little more closely.
L = 800 turns bifilar coil around a ferrite core, about 30 ohms
C= 30μF, 4000VDC
In the above example both switches are closed and opened simultaneously. During the charge phase the circuit would charge the inductor generating a magnetic field inside the ferrite core.
When the switches are released the cold electricity would theoretically be appear across the capacitor. In the video he showed up to 170v.
How does a voltage appear across C when there is no closed current loop? The authror notes: “Here is an effect that happens with electrical potential when it encounters a resistance before the current saturates that resistance… We are taught in school to close all the circuit paths, but this stops the flow of free energy. ”
We could be dealing with a completely different type of current generated by a completely different type of magenetic field. I have 2 theories about what may be going on:
- With the switch open abruptly we create a singularity because the change in current must remain continuous across the inductor. Before the magnetic field collapses it expands and voltage increases through the winding. The voltage potential charges the capacitor without drawing current from the battery.
- This is basically the ferroresonance effect and the ferrite core was saturated, the negative domains moved, the positive charges responded, a neg-entropic magnetic field was generated, the field was induced into the coil, and the coil charged the cpacitor.
When our society harnessed the negative charge (electricity) it made our way of life possible. We would still be riding horses and plowing soil had this not happened but we are still missing the other half of electromagnetics. Imagine what may be possible if we can harness the positive?
See also
Cold Electricity: Correspodence from the EVGRAY yahoo group.
GENESIS: A description of a negative inductor capable of producing a cooling effect.
Scalar EM Research 
Thank you for posting this information! Do you know of a way to convert/exchange cold electricity to hot electricity?
What I can tell you is that cold electricity is related to the positive charge. In an atom the positive charge of the electron and the negative charge of the proton have opposite charges but the nature of their charges are different. Most current day technology relies on the action of negative charges but our textbooks are missing the other half of the equation.
Think about the implications of this because if the charges have different natures then their magnetic fields are also different. I think that the first thing people need to understand is that mass is an electromagnetic effect. Here is food for thought: if you drop 2 identical objects from a tower except that one is magnetized will they both fall at the same speed?
The electron is made up of 9 bosons. A boson is or what’s referred to as Plancks constant which in reality is an equal lateral triangle, a 2 D energy quoin. Like a coin except one side is positive and the other negative. Everything in the universe is made of these 2D mass energies. When 4 of them come together they form a 3D matter topologie otherwise known as a tetrahedron.except it’s negatively charged because of the arrangement of equal lateral Planck Ajanta. So when 3 of these charges come together via the weak nuclear force you have an electron in all its majesty
> The electron is made up of 9 bosons. A boson is or what’s referred to as Plancks constant which in reality is an equal lateral triangle, a 2 D energy quoin.
I thought the electron is classified as a lepton which is a fundamental particle. What evidence is there that the electron is not fundamental and how would the charges of the charges of the bosons balance?
They do not as in Boyd bushman’s experiments while working for Lockheed martin
Tesla produced DC and AC current from several different cold electricity setups. The easiest and most practical to my knowledge is a hollow copper sphere in the general area of a spark gap that is magnetically quenched. Tesla said that it would induce the radiant field and had an output of several different types of electricity. The closer the sphere is to the spark gap, the more current it will induce. Be care full trying this! DC and AC are lethal, cold electricity is not.
Here is my most recent video showing what I have been trying to replicate and show to people…Next step is to put in higher voltages with a spark gap from a nst and also I am making a larger asymmetric motor…the one in the video is a 250 watt (just to clarify I am only putting in around 12 watts to the motor), I will be wiring a 1000 watt soon. I have begun to understand things in terms of geometry…I will try some of these experiments with the sphere….do you have any circuit diagrams for this conversion? I have only seen av plugs/bridge rectifiers for DC. Thanks for your reply….
Warren
Here is a circuit diagram for the transformer/multiplier combination that I used to generate over 20,000V.
Alex,
There are a number of fascinating books about Tesla out there but unfortunately many of them are more fantasy than fact. If a book makes an extraordinary claim about a discovery Tesla made then they need to back it up with sources.
I am quite interested in the extraordinary insights that Tesla had but when you say that Tesla found “several different types of electricity” can you point me to where I can find more information about this?
Also, regarding your comment that “cold electricity is not lethal” I will mention that I have reason to believe that it plays an important role in biological signaling and if it is made the “right stuff” you would not want to get shocked by it. I recall that Floyd Sweet was once shocked by his magnetic system and it was intensely painful and its effects lasted a week.
Warren,
I have done some experimentation with HVDC and I was able to produce spark gaps of about 5cm using small and inexpensive components. My setup was like this
1. Variable signal generator feeds into driver.
2. Driver runs at 12V and send high current into high volt transformer that probably came out of an old television.
3. Transformer steps up signal to about 2000V and feeds into a voltage multiplier.
4. The multiplier was built from some high volt diodes I obtained from a Chinese vendor on ebay. I wrapped the diodes and caps in nylon tape to prevent arcing.
5. The signal coming out of the multiplier had peaks of over 20,000V.
To achieve this level of efficiency I needed to tune the input signal so that it was resonant with the transformer. I could produce enough voltage to raise an electrostatic lifter (and did).
The system I built could produce very high voltages with very little power. (e.g. 15W) I would caution about high power systems because they are dangerous and unnecessary.
The key here is find the underlying physics and it does not matter if you are working with 1W or 1000W. You don’t need a steam shovel to find a needle in a haystack.
Peter Lindemann and Eric Dollard are some of the best sources for this info. I have also studied all of Tesla’s work, including all work on him, fiction or not. It is the fundamental principles that I think are the most important to understand. I am currently attempting to construct a circuit to achieve the lowest possible discharge times in the spark gap. This is one of those principles that he stated in several news articles written by him, and yet it still has not been replicated. When radiant energy in its purest form, it will not hurt you. This is also fundamental. The copper ball idea specifically came from Lindemann, though.
I think I have done some experimentation with the radiant energy you are talking about. As I commented earlier in this page I was able to light a small neon lamp by holding one of the terminals in my fingers and the other close to but not touching a small antenna. The neon would normally take 90V to illuminate and I felt absolutely no electric shock.
This was accomplished by putting a high inductance coil between a driver and an antenna. The driver was relatively low voltage. When the voltage goes in one end of the coil the current slowly starts to build a magnetic field to match the potential on the other end of the coil. On the other end the current runs into a problem because it finds and antenna and has nowhere to go and so the potential starts to build as the magnetic field in the coil collapses. This causes a relatively high static potential in the antenna. You can create a very powerful field if you tune it just right.
Below is one of the designs I experimented with. You can see a transformer leading to the inductor and antenna.
An electric charge is first endothermic as the force in…which is the electric field grows against the force out..the voltage pressure…only when the force in is greater than the force out…passing what I have named the Newman point after the late Joe Newman.. .does it become resistive..
Can you clarify what you mean by “resistive”. In a circuit you have induction, capacitance, and resistance all causing impedance. These are often labeled as (L,C,R) and are given vectors (i, -i, 1) in the complex plane.
If you have a circuit in oscillation then the at any point either the L or C component is pulling electrons from the other causing a negative voltage pressure. For this to happen you need complex impedance. Resistance is not necessary.
In the textbook descriptions impedance can be negative or positive on the imaginary axis but must always be positive on the real axis. One of the arguments on this page is that you can have negative impedance on the real axis under special conditions.
When you say “resistive” are you talking about negative impedance on the real axis?
Watch video
Sorry, to much bullshit on a readily explainable phenomenon. This is not cold electricity. Inductor can dissipate its energy without a spark or a closed circuit, as simple as that. Also, no inductor can magically form a magnetic field with zero current flow. So the battery is indeed discharged through the inductor.
I understand that the inductor can dissipate energy without a closed circuit. I was just trying to document the circuit in the video. You can see a noticeable difference in the sound and appearance of the spark between the exothermic and endothermic examples. There was another video he did where you could see frost on the electrodes.
Frankly, I have a lot of new information since this post was made. At this point I think the cold electricity is not electromagnetic and interacts primarily with atomic nuclei. With a powerful impulse he could be hitting NMR frequencies and de-shielding the nuclei in the metal from their electrons.
I understand cold electricity acts longitudinally and hot acts transverse. I am also under the impression cold is a negative mass electron while our text books study only positive mass electrons. Studying how the Avramenko plug works especially in diode electrolysis shown by Dr. Stiffler is very confusing. It is completely backwards. I was given the impression that Moray and Tesla may have found a way to capture negative mass electrons by resonance or regenerative receivers and then recombine them with positive mass electrons from the environment while using the current to turn a motor….there are many different radio tubes and radioactive alpha emitters that could have been used to ionize a substance such as germanium into beta decay resulting in a flow of electrons. (the moray valve) I have yet to test this. For now I am trying to truly grasp the idea of backwards electricity and understand the vacuum for what it is. Are you hinting towards being able to use cold electricity to turn motors with a different wiring configuration?
I did a lot of investigation into the Stiffler energy collection device. At first I thought it was an RF phenomenon but then I found that the LED would light up to a lesser extent even at audio frequencies as low as 100Hz. You can see some of my results in my Single-Wire Power Transmission article.
What was even more interesting is that most diodes other then the 1N4148 did not work. The 1N4148 is often chosen for RF applications for its high speed but here was a phenomenon that was happening at low frequencies. In one experiment I tried many different types of diodes and the only other ones that worked were the old RF crystal diodes.
If you are dealing with negative mass then it would need to have negative inertia and weight. Why not positrons? I am hinting at a new type of field connected with positively charged particles like protons the way electrons are connected with electromagnetic fields. The main difference between a proton and an electron is that the proton has much more mass. Physicists seem of proud of finding the higgs boson but I think they are ignoring an explanation that is much more obvious. There is a hidden science of understanding the nuclear field of the proton and when scientists discover this field it will also explain the origins of mass.
If you are interested in using radioactive decay for electrical power generation check out the work of Paul Brown.
So, Dr. Stifflers SEC exciter is more so, something new entirely? I was trying to connect the dots with it being a cold electricity circuit having to do with negative mass electrons…(in other words they were part of the same nature having the ability to be reunited to do work) So negative mass electrons = positrons and protons also have a separate influence on the magnetic field….
As for the diodes, I am using some antique Russian detector diodes off ebay and was getting around 75% increase in voltage. n4148’s were giving me around 100-115 vdc while the antique diodes were giving me peaks around 215-225 volts in some cases depending on input voltage of course. The caduceus coil also does some very interesting effects when excited…like raising the noise level on the SA (in other words resonating at a huge bandwidth on all frequencies across the spectrum) when tuned right and it also can present a higher voltage in comparison to any L3 by itself when excited by an L3 coil.
As for thinking of “cold electricity” as a separate entity from the electron…this throws my current understanding out for a paradigm shift. Perhaps a different nature of a “transformer” is worth researching….
I am starting to experiment with regenerative radio circuits and using old radio tubes as an oscillator instead of a transistor (tubes switch off by voltage, transistors by current) in hopes it will not be as wasteful as the current run transistor oscillating circuits.
Hello,
a pretty simple circuit. I built it with wires instead of sw1 and sw2 and yes it works and the capacitor is charging to a higher voltage then the battery. But when I replace sw2 by a diode the result is the same.
Anyway, in my opinion the point is: how can we switch absolute simultanously? If it is no cold electricity, the Voltage over C depends on the switching time overlapping and the other parameters like R,L,C.
It is necessary to build switches with switching times in the nanosecond area. A good question is the Voltage rating of the semiconductor switches, for example MOSFETs. Do we have a high Voltage (500 Volts and more) at the opening switches or not? If there is cold electricity, I guess a 500V Mosfet will stand it, otherwise it will blow. Could it be worth to try it?
Solid state switches have never bee the best at dealing with high-voltages. If you want fast switching for this then a spark gap can be very effective.
If you want something more controlled then there is a Thyratron or the more modern that can handle up to 4K volts in some cases. You could also cascade a set of MOSFETS in series.
there is no doubt, mechanical switching would be better here. I thought about a spark gap too, but how can we replace sw2 by a spark gap? By the way: does anybody understand the sense of sw2?
Understanding sw2 is the key to understand the working of this circuit I think.
It is hard to see what SW2 does. It looks like it would affect the scalar potential of the positive terminal of C at the start of stage 2 by keeping the voltage across C zero.
Hi,
after reading the article about the negative inductor using a bifilar coil, electified into negative, I see my mistake. The coil has to be bifilar, it seems to be essential. When I try the circuit with a bifilar coil, the effect is nothing. Ok I admit the switches are simple wires as in the video.
I think this circuit is nonsense, please correct me if anybody has tried it successfully. I am willing to learn.
The description of a negative inductor in the genesis project seems to be more promising. In this project the background of the bifilar coil is electrified into negative. This aspect is missing in the above example, we don t have a relative move of the same kind of charges in the sum of relative moves between all the charges in the inductor. As described, the relative move between equal charges is essential for the negative magnetic field. Without the negative magnetic field there would be no “cold” current – only if the theorie in the description of the genesis project is correct.
Conclusion: If the genesis project describes a true phenomenom, then in the above circuit an essential aspect is missing.
Otherwise the whole story about negative inductance and cold electicity is not as described in the genesis project. I wonder that there is no more information about this fascinating phenomenom in the internet. Is it a fake or is it true?
Thank you for the informations and discussing the theme.
> The description of a negative inductor in the genesis project seems to be more promising.
This circuit shares some characteristics with the genesis coil. You have a large inductor that gets charged before the switch is opened. The current will have nowhere to go and it will create a large negative voltage on the open end. I don’t think we should write it off just yet.
> we don t have a relative move of the same kind of charges in the sum of relative moves between all the charges in the inductor.
I don’t think it is the relative motion of charges that creates the negative magnetic field as much as it is the motion of positive charges. Regular circuits do not create the field because the positive ions (copper atoms) are not moving. Changing the scalar potential of the coil shifts the charge relative to outside observers.
> I wonder that there is no more information about this fascinating phenomenom in the internet. Is it a fake or is it true?
I have seen a great deal of information that leads me to believe this field does exist. I have also seen it called s-field (referring to a field with a spatial vs temporal bias). You could also consider it a time reversed field. The videos could be a fake but concept of separating the s-field from the t-field to produce a negative entropy type phenomenon is valid.
Here is a video of mine that shows radiant energy clearly i think. I am running this circuit through excitation of one wire. much like how the capacitor gets charged in this circuit. It is a simple circuit and all parts can be bought at radio shack.
I have done a lot of investigation with this type of circuit. See some of my results at
You should keep in mind that at high frequencies space becomes capacitive and energy can move by means of the electric field without transferring any charge. This is referred to in Maxwell’s equations as the
You may notice that typical rectifier diodes don’t work. I have tried all types of diodes and I found nothing better than the 1N1418.
Would this show how positrons recombine with electrons through a current loop? Ive found the neon will light up brighter when there is a lead or “antenna” attached to one side. The presence of positrons are shown with the purple spark. It also seems cold to the touch compared to when the neon is orange….Havent been able to find an explanation for this effect so far…I believe the capacitor gets saturated or stimulated by positrons resulting in the collection of free electrons from the environment to charge the capacitor to try and equal the electrostatic force the positrons provide. This would explain the additional charging of a capacitor wouldnt it? Tesla did work with radiant energy involving an electrophorus. When the antenna was charged with an electrophorus it was able to absorb radiant energy from the environment better. Not sure which charge was used but it was an electrostatic effect.
This could truely show how positrons combine with electrons. The positrons are the missing component for this theory taken from the genesis project in the link above:
the relative move between different charges is causing a positive magnetic field, covering positive energy.
The relative move between the same kind of charges is causing a negative magnetic field, covering negative energy.
There is also a positive and a negative selfinductance. The negative selfinductance is exactly opposite to the positive (normal) selfinductance. Therefore there must be extra energy entering the circuit. I don t think that this negative energie is accelerating the electrons in the circuit. In my opinion it is more logical, that there are positrons entering from space and time and combine with the electrons. The relative move between the positrons and the positive charged ions of the wire would also cause a negative magnetic field. It would be possible that the relative move between the negative electrons cause a negative magnetic field. When the field changes then there are positrons entering from space, which flow in the opposite direction of the electrons and combine with the electrons.
This would be pretty nice in theory, but why does my bifilar coil don t work? Ok, I have less windings, only about 500, but is it the reason for only the battery voltage in the cap? – it depends on the switching – do you switch absolutely simultanously?
> The positrons are the missing component for this theory taken from the genesis project in the link above.
I agree. The positrons are a carrier of the s-field which is an important missing part of modern physics books.
> I don t think that this negative energie is accelerating the electrons in the circuit. In my opinion it is more logical, that there are positrons entering from space and time and combine with the electrons.
I think that something more interesting is going on and that electromagnetics can be reduced to hydrodynamic problems. Consider a vortex like a tornado and how it pulls in air from around it and powers itself from ambient currents. I think that the tornado shares a connection with the positive charges when they suck in flux in what appears to be a reversal of entropy.
Current mathematical systems don’t deal with this well and my current area of research is applying multi-vector physics to problems like this.
> When the field changes then there are positrons entering from space, which flow in the opposite direction of the electrons and combine with the electrons.
You could view this as a re-combination of positrons and electrons but consider that any time you have a voltage potential you have a force that wants to make charges combine. In an LED you have electrons and holes (positrons) that combine to produce light. When electrons and positrons combine you would have a release of energy in the form of photons.
> This would be pretty nice in theory, but why does my bifilar coil don t work?
I don’t think the circuit above will work with a bifilar coil because there would be no way for you to build a scalar potential in the coil.
> The presence of positrons are shown with the purple spark.
I noticed this too. It seems that at higher voltages you get the purple spark instead of the neon glow. The spark looks a lot like a spark jumping through air. There must be 2 different phenomenons that produce the different colored sparks.
> I believe the capacitor gets saturated or stimulated by positrons resulting in the collection of free electrons from the environment to charge the capacitor to try and equal the electrostatic force the positrons provide.
Again, this is the displacement current. When you charge a capacitor there is not any charge crossing between the plates. The energy is transferred because existing electrons are pushed to one side or another as the electric field builds. Energy is stored in the electric field.
Hi,
This is written under the circuit drawing:
L = 800 turns bifilar coil around a ferrite core, about 30 ohms
I think a bifilar coil is essential, otherwise we have normal “positive” inductance. I am not sure, but reading the genesis project leads to this conclusion: a bifilar coil is nessesary for having charges of the same sign moving relative to each other. This leads to a negative magnetic field, carring negative energy.
You have a good point and the bifilar coil in the circuit reminds me of the Floyd Sweet schematic. I can post it if you do not already have it. I think that the Sweet device was able to induce rotation of magnetic domains in the barium ferrite. The barium is unique in that it has a un-paired proton comparable to the way that iron has an un-paired electron. He then used the resulting field to generate a positron current in the bifilar coils.
Typically in a bifilar coil the magnetic fields cancel and you get zero inductance. The part that is unique about the Genesis device is that the coil is charged to +500V. One way of developing a math model for this is to apply existing theory to a rotating copper plate. You can then consider what happens when a voltage is applied to the plate.
When you rotate the plate a number of things happen:
1. the rotation drags free electrons which produces an electric current.
2. The current produces a magnetic field.
3. The Lorentz force pushes the electrons radially.
The rotation of the positive charges in the copper atoms could possibly be the source of the negative magnetic field.
This is one of the better schematics ive found. the coil configuration is left up the the experimenter to figure out. Ive gotten good results while pulsing a pancake coil with a rodin vortex coil wrapped around inside it as the secondary. A neon can be lit up with a mighty purple glow at frequencies from hertz to Mhz (the neon is in parallel with the secondary). The frequency that is best is a result of the resonance of the coil being pulsed. Radiant comes in whenever there is a magnetic field induced. To go off of your vortex idea, vortexes (ordered systems) come into existence to dissipate disorder much like putting a hand through water. Vortexes will appear to balance the system. Hence our electric field is induced by our hot side of pulsing…then radiant energy comes in much like a vortex to balance with the so called “aether” that is disturbed by our input. The magnetic field must collapse. Capturing this collapse can be done with proper secondaries. This relates to a bifilar coil because the collapse is captured well like a 1-1 transformer. Radiant energy is much higher frequency and voltage. We must have very fast OFF times in order to catch only the cold portion. The hot portion (our input) will cancel it out thus usually creating heat. In the form of AC current, radiant energy thus would be constantly canceled out with every phase of the voltage fluctuation. Pulsing a coil DC with a separate secondary seems like the best way to capture the energy, the geometry to do so can be improved with more study. Also on the website posted is information on how to make an ion valve. Much like the moray valve, uranium 235 (stable) can be used to dope the electrodes in the neon gas filled vacuum tube. It apparently undergoes a reaction with radiant energy and exchanges a positron (or whatever we would like to call it) for an electron resulting in usable current flow. I encourage you all to join in replicating and discussion of the topic. Heres the patents for a couple of interesting devices as well.
Click to access US7800286.pdf
Positrons and electrons cann’t live together in peace, which results in a very short lifetime. As they atract each other, they combine rapidly anihilating each other and releasing all of their mass/energy as a gama ray (which can be hazardous).
tesla was the first as far as i know to discover the effect he called “electro-static in nature” he left us guidelines that must be followed if you want to produce the effect.
1. the most important aspect was the” increase in pressure per unit of time”.
‘capacitor discharge”
2. after the the energy jumped the spark gap you had to stop the current from oscillating across the gap and expending or wasteing its energy. he used magnets to stop the oscillations. magneticlly quenched spark gap.
just as a side note he noticed differences in the effects depending on which pole the spark gap was closer to- positive or negative.
I highly recommend the book by peter Lindemann THE SECRETS OF COLD ELECTRICITY-if you going down this cold electricity path. it is written in normal language anyone can understand unlike tomas beardens work that requires a Phd in electrodanymics just to understand…..Good luck guys!
While I agree that Tesla used a magnetic quench across his spark gaps to achieve higher frequencies there are bogus authors out there making up Tesla stories so they can sell books. I am not saying that Lindemann is one of them but I emphasize the need for material that can be validated.
Also, Bearden got his PhD from a diploma mill and I don’t think you need one to undestand his stuff.
Hey guys … Chad2 suggested barium would produce an anti-magnetic field so to speak and Warren you were wanting to build a different inductor how about a coil wound on a PVC pipe filled with barium instead of ferrite for the core. just a thought.
I should clarify this: There are 2 primary types of materials common in ceramic magnets: barium ferrite and stronium ferrite. The barium magnets were the type used by Floyd Sweet presumably because it has an un-paired nucleon to generate the dia-magnetic field similar to what happens in iron with un-paired electrons.
Unfortunately the entire industry switch to using stronium instead of barium and so the barium ferrite magnets are very hard to obtain. Coincidence?
http://m.youtube.com/index?&desktop_uri=%2F#/watch?v=gNXE0x5B-us
This is the inductor I came up with (it’s a Rodin coil). I designed the primaries and secondaries to be same weight in copper just like nikola teslas co springs oscillators. Here I show it outputting Cold electricity. I am designing a new circuit that will be able to handle much higher voltages on the input. The goal is to excite the coil into resonance which will cause fluctuations in the “ether.” when a disturbance is caused like any other artificial magnetic disturbance we create, nature pushes back with a flush of static electricity. This is the same static generated as lightning. The coil once excited offers a path of least resistance (being a vortex) for electrons from the ground to recombine with positrons from the atmosphere. This is happening everywhere all the time. Getting something in resonance with it is key to tapping the “vacuum” and keeping it flowing by putting a tuned load on it. The load will have electrons essentially flowing in one direction, being cold in nature on their way to recombining
Electrons combine with protons (not positrons!) to form hidrogen atoms. Single protons correspond to ionized hidrogen atoms.
http://m.youtube.com/index?&desktop_uri=%2F#/watch?v=gNXE0x5B-us
Here is a true asymmetrical inductor (a rodin coil). Here I show it outputting cold electricity. I have the primaries and secondaries the same weight in copper just like teslas co springs oscillators. The goal is to excite the secondaries by pulsing the primaries. The secondaries then become a path of least resistance for positrons to recombine with electrons from the ground, or in other words lightning. This is what cold electricity is, tapping the atmospheric potential that exists all around us.
It appears what you have created is high voltage RF. The “lamp in water” trick works at high frequency A/C because the capacitive properties of the lamp dominate as opposed to the conductive properties.
In one experiment I generated a powerful RF field and I was able illuminate a neon lamp just by holding one terminal with my fingers and leaving the others open to the air. this neon required 90V to reach that level of illumination and there was no shock whatsoever.
Are you observing any temperature drops or green sparks? You may want to control for some variables to determine what effect the Rodin coil has. For example you could replace the rodin coil with a typical solenoid and see if you get a difference.
One more thing…. Floyd Sweet said that shocks from cold current are very painful and can leave an ache for over a week. The bifilar coils he used were wound so their magnetic fields cancel meaning that they could not be induced by a magnetic field.
I am speculating that the positron field created a level of excitation in the bifilar coil similar to negative resistance so they were able to induce current without a magnetic field.
There cann’t be positrons in such a circuit. As positrons are antimatter, they anihilate the electons with which they combine, emitting gama rays.
> There cann’t be positrons in such a circuit.
There is the concept of pair-production (https://en.wikipedia.org/wiki/Pair_production) but you are correct that the particles should annihilate; however, consider a semiconductor where electrons and hole exist in separate bands. In that case we have opposite charges that don’t usually combine except in LED’s where they emit light.
I wouldn’t call it rf just yet. Doesn’t rf radiate through the air as well? The stray wireless signal is pretty much negligent. The ability to light up the light underwater tells me it’s a magnetic oscillation without the electric part. This also showed the energy transformed in the vortex also preferred a higher resistance.
Instead of “resistance” when dealing with AC or RF you should use the word “impedance” which is a combination of resistance, inductance, and capacitance. The RCL combination is a complex number that functions just like resistance except that there is a rotation in the complex plane.
In the case of the lamp in water the power will flow through the path of lowest impedance.
Damn humidity. Think. Hot outside high humidity. Cold out side we get hit with static discarge. Spasmatic discharge is not that hard to contain in a magnetic feild. Think small. Tv, phone simple things that brake up and distort what we want to hear then the crap we dont.
Love all your work and you are a great teacher. Have you looked at Stan Myer research? Anyways here is my explanation on cold electric. its guess work as i have never had any formal education. https://www.youtube.com/watch?v=rT6MTNNIBMk&feature=c4-overview&list=UU0ZPFzU6n0cDGXTB0XT3vRQ
Have you seen The Primer fields
One switch (spark gap) can get cold ONLY because the other is getting hot. That’s basic thermodynamics. (The same is true of thermocouples.) You’re transporting heat from one to the other.
In the case of thermocouples, there’s an entropy difference when the electron is in one material vs the other. Not sure exactly what is going on here. It must be related to magnetic fields because we have rapidly changing current and because this wouldn’t normally happen with just E fields. I’d guess that the B field induces the electrons to cross the gap faster than the E field would have made it?
I agree with your comment about entropy and that a cold terminal on one side should result in a hot terminal on the other side. This is required for entropy of the system to remain balanced.
Although it may appear obvious that entropy is not a reversible process there are many physicists who are are perplexed with this idea considering that most physical processes are reversible. (see: http://en.wikipedia.org/wiki/Arrow_of_time)
My suspicion here is that there is a new hidden field at work that has characteristics similar to electromagnetism but has a time reversed nature.
There is no need for such a field. See Ilya Prigogine’s theory on self organizing systems, as live systems, for instance.
Guys, please, go to your local junior college and take a class in Electricity & Magnetism.
Electrons and protons have the same type of charge (otherwise protons couldn’t convert to neutrons and back). The difference is that one participates in the “strong force” or “strong interaction” and the other does not. In everyday life (under non-extreme conditions of temperature and pressure etc) nuclear effects are negligible.
You can’t make a positron circuit out of matter (as opposed to anti-matter). Too many electrons around to cancel out the positrons.
You could make a proton or ion circuit; some bio processes involve H+ crossing membranes if I’m not mistaken.
> In everyday life (under non-extreme conditions of temperature and pressure etc) nuclear effects are negligible.
Consider the equipment in common use that uses NMR (nuclear magnetic resonance) like MRI systems. Also consider the radio-isotope scanners used in most airports. (these are the machines that screen your hands for explosives). There are common examples of where nuclear effects are exploited in the commercial world but these examples are limited because the nuclear fields are shielded by electrons.
> You can’t make a positron circuit out of matter (as opposed to anti-matter). Too many electrons around to cancel out the positrons.
This is a very good point… some processes allow for the movement of protons but in an electrical circuit the protons are locked in place. This explains why the cold electricity effect is exotic; however, there are conditions where moving positive charges can exist. For example:
1. a rotating copper disk with a positive static charge. (a variant of this uses the lorentz force to push electrons towards the center of the disk).
2. Rotating isotopes in a magnet like in the Floyd sweet device. In this case the movement of magnetic domains caused a perpendicular movement of barium isotopes which induced an exotic type of magnetic field that may have induced positrons in a copper coil.
3. Consider that charge is a relative quantity. If you touch an HV power line your body will equalize with the static potential of the line which is about 20,000V. Once you are part of the stream a passing car would appear to be positively charged.
So yeah, endothermic processes happen when you let an electron or something into a higher-entropy state (more ways for it to be that way; remember S=k log W; so higher W), as when a gas is released into a vacuum.
There’s no distinct “cold electricity” any more than a “cold gas” is a distinct type of gas.
This site says “Endothermic reactions cannot occur spontaneously. Work must be done in order to get these reactions to occur. ”
http://chemistry.about.com/cs/generalchemistry/a/aa051903a.htm
But then they give you a sample experiment, demonstrating an endothermic reaction, which does not involve doing work:
http://chemistry.about.com/cs/howtos/ht/endothermic.htm
> There’s no distinct “cold electricity” any more than a “cold gas” is a distinct type of gas.
The term “cold electricity” is just a name for a mysterious phenomenon. My research has led me to believe that this is a new type of field.
I wrote this page years ago and it is in need of an update that describes in more detail what experimental evidence is available and how the dots can be connected.
This topic is a hell of a rabbit hole and the implications throw into question a lot of what we take for granted. It seems inconceivable that so many physicists could have locked themselves in a box because of incorrect assumptions about basic mathematical operators and yet I have seen evidence that suggests they are wrong.
I don’t want to validate the string theorists here but too many of them are mixing up the concepts of dimension and subspace. Just because some characteristic of space is orthogonal does not mean we have 12 dimensions. Its like saying spin is orthogonal and therefore it is another dimension…. spin is a unique characteristic of motion and can be described more accurately as a subspace.
Here is my latest work. Very interesting indeed. This is the resonant balancing of radiant electricity…In other words the resonant balance of the back emf spike generated by pulsing a bifilar coil. When hooked up to a physical structure to resonate with, it builds up like a sound in a guitar and impresses its oscillations on the surrounding environment.
Questions and comments are welcome.
I have done an experiment like this that I described in my single-wire transmission experiment. Basically you need the inductance of the coil to be resonant with the capacitance of the surrounding space.
Doing this can generate some very intense ELF fields with minimal power input; however, I don’t think that this alone is sufficient to separate the cold current. I think the cold current a component of the field but you won’t notice anything unusual unless you can separate it.
I will give you 2 examples https://www.youtube.com/channel/UC0ZPFzU6n0cDGXTB0XT3vRQ
Where can you find an Electrolux rapido hand vac to use the internal “”modulator” from it? (Besides eBay)
Are you talking about a part from vacuum? I suggest you identify what you are really looking for.
Very well, I want to obtain the same style electric motor from whatever contraption was shown on Gerard Morins’ video.. Rwg research just posted a video on YT, attempting to replicate some similar effects that he tried to mirror from Gerard’s setup albeit with unsatisfactory results. personally I think his approach was all too typical of what most experimenters wrestle with, namely, measuring the values associated with a closed circuit before any real available reactive power is demonstrated in a tank circuit. I wish to find what I think was the same kind of hand vacuum shown on one of Gerard’s videos, I believe it was an Electrolux Rapido hand vac but I’m not sure. On eBay, they are asking near $80.00 U.S.D. For one!?! does anyone know if this is the same brand? BTW,..what “style” motor is that called?
I have not seen the Gerard Morins video but if you are talking about a battery operated vacuum it would either be standard DC or if it is sophisticated it would use brushless.
If you see 2 wires going to the motor then it is DC. 3 wires would be brushless.
I think the genesis project is one step on the way of Tesla bath, a non-conductive coil is what Tesla said when explain why some experminters can’t produce his results, he said that in his circuit he stores the energy not radiate it. also he said fast , intense impulses produce another kind of energy which is cold or negative energy, I need here to mention in this context the work of Bedini.
When shopping from the internet, a phone number of citizenry a great deal get clip to show through with
a couple on of reviews on the merchandise in front making a buy.
This is because; online merchandise reviews
face the divers opinions from those who give bought the products ahead.
Thus, it would be suited to enounce that online cartesian product reviews give the sack experience
an bear on on the gross sales of those products. The
shock of online production reviews on gross revenue throne either be empiricism or damaging based on the modulate
and personal manner in which they are scripted. At times,
it toilet also be based upon the people World Health Organization compose them.
However, it should be renowned that an apotheosis online intersection go over should be clear scripted based
on the client undergo and not whatsoever early grammatical category reasons.
That is the entirely fashion done which they privy be utile to
you as the business possessor and your perceived customers.
Hi there,
May I ask something ? It seems the circuit can only work once.
After the first cycle, the capacitor will be charged, while the next cycle will close the SW1 and SW2 causing the capacitor to be Short Circuited, depleting the charges.
If I add SW3 between the battery and the capacitor with the switching mechanism inverse to the SW1 and SW2, it seems will remove this problem, but will the circuit remain working ?
Thank you
I think you are mistaken. SW1 and SW2 are not supposed to be closed at the same time.
Watch the video from link below
Your video link is not working. Please repost.
https://m.facebook.com/story.php?story_fbid=10208819866195797&id=1287851173
alas the video by NRGF is no longer avaliable , I wish I had copied it . If someone has please re-post it thanks
Darn. I guess nothing lasts forever. My main takeaway is that electrical current is a bi-wave pair just like any other wave according to Euler’s identity: 2sin(t) = e^it + e^-it.
This equation tells us that any wave is composed of 2 complex exponentials. If you look at the sign (-t vs t) you can see that they are time reversed. Opposite charges are also time reversed. For example a positron is a time reversed version of an electron.
Negative charge is related to forward time because of its divergence of the electric potential. Consider that current always flows away from a negative charge and is forward-time because it has scattering and entropic characteristics. The reverse is true for positive charges due to CPT symmetry.
In a typical electric circuit we see motion of negative charges. So where are the positive charges? They are stuck in the nucleons of the metal. They are moving relative to the electrons but not to us.
How do we rectify this? One way is to rotate the metal like in a homopolar motor. This would produce a time-reversed magnetic field.
Joseph Neumann observed that after operating his motors for an extended time it would accelerate faster in one direction than the other? Why is this? Because by rotating it the nucleons aligned and became magnetized by a process similar to the Barnett effect and so they had angular momentum trapped in the magnetic field.
This was not a magnetism caused by electrons because copper is not ferromagnetic but it interacts with the superfluid spacetime giving the atom most of its mass.
What do I mean by electromagnetism causing mass? I will let Feynman answer that one. For all we know most of the mass of the electron could be caused by electromagnetism:
http://www.feynmanlectures.caltech.edu/II_28.html
Greetings,
A colleague just sent me the link to this blog page and I notice the two Youtube videos linked at the top of this post, namely:
and
have both been “disappeared.” As has NRGFromTheVaccum entire channel.
Any idea where to view these videos would be most appreciated.
Thanks
JW
a bit of luck, sometimes , I found a copy of this video on an old hard drive I must have thought it worth copying . I have re-uploaded to youtube , I hope you replace the link so the thread again makes sense https://www.youtube.com/watch?v=Mo6gViPywRI Kindest regards Duncan
Thanks for restoring this! I have updated the link. Do you have the any of the other videos like “Free Electrical Energy”? I think that was the one with the green sparks.
Happy to have a look for you Chad
Duncan could you email me? Got some questions regarding your “donut”
not sure about about emails ‘in clear’ still I guess those who mean harm know everything in that regard anyway . I look forward to talking to you . my kindest regards Duncan
duncanpickthall@sky.com
Grand article continue comme ça !!
interesting, I see some flaws, but its in the right track. A coil can be switched on the positive (high) side. this is most common. it then produces a positive inductive spike (back emf) which is a high voltage half wave.
the coil can also be switched on the negative (low) side. it then produces a negative high voltage half wave.
this is due to resonant tranformation of the current into the voltage.
Nikola tesla used these half waves and called them “impulses”.
I feel the video explains the difference between the positive and negative voltage discharges.
I use these negative impulses, to create a displacement current, and due to being negative it is imploding into the conductor.
my youtube channel shows this (Master Ivo)
I need to correct my previous reply as I made some errors.
Here is the correct reply:
A coil can be switched on the positive (high) side. this is not so common, as it needs an isolate gate driver.
it then produces a negative inductive spike (back emf) which is a high voltage half wave.
the coil can also be switched on the negative (low) side, this is most common, as it is easier as it doesn’t need an isolated gate driver. it then produces a positive high voltage half wave.
In addition, radiant energy is created when a very fast unipolar change in voltage appears on one of two capacitor plates that holds a charge.
So often it is related to a quenched sparkgap discharge of a capacitor.
But it can be used with coils acting as capacitor plates also. If one coil plate is made resonant it can create a very high voltage, which charges the coil capacitor.
the other plate coil can then hold a low dc voltage, which at the maximum AC voltage of the coil capacitor is switched to ground.
since the charge in the field is high the small change in dc voltage will set the field in motion, creating a “cold” current.
To prevent a hot magnetic current, a choke coil is used to prevent it flowing from the dc supply. And the switch to ground is only turned in very shortly.
The DC voltage after the quick discharge, then slowly charges the coil up again to the dc voltage level. the result is an unipolar discharge.
The quick discharge of around 40ns is a radiant energy event, and the resulting current is cold.
I will present this in the near future on my YouTube channel (@MasterIvo)